Table of Contents
Advertisement
❖
Clear credentials
Clear all authentication information or certificates from the
authentication storage.
1
From the Home screen,
[Security]→[Clear credentials]→[OK]
◆ SD card password settings
Set a password to microSD card to prevent others from
misusing.
･
Some microSD cards may not support this function.
･
To set SD card password, set security unlock preference in
advance.→P110
1
From the Home screen,
[Security]→[SD card password settings]→
Authenticate
2
Set required items
･
When precautions about unmount SD card appear, tap
[OK].
Register password : Register microSD password (within
16 one-byte numbers).
･
1 password per a microSD card and up to 20 passwords
can be registered. When number of registrations
exceeds the limit, the oldest registration is deleted to
register a new one.
Authenticate password : Authenticate microSD card to
which a password is set on another terminal.
Change password : Change microSD card password.
Delete password : Delete microSD card password.
→[Settings]→
→[Settings]→
118
Forcibly delete password : Delete all data including micro
SD card password.
■ When a password is set to microSD card
Password authentication is required when the microSD card is
attached to other terminal. If you attach it to a PC or a phone
without password setting function, using the data or
formatting cannot be made.
Illumination
Set illuminations for incoming call/mail, during a call, when
turning the power ON/OFF of the terminal, etc.
1
From the Home screen,
[Illumination]
2
Select an item→Set each item
✔INFORMATION
･
Illumination that turns on when notifying mail or SMS lights
for approximately 4 seconds according to the settings. If new
mail or SMS is received after approximately 4 seconds, the
illumination lights according to the each mail settings.
However, when you unmark [Illumination] in the mail
settings of sp-mode mail or turn OFF [LED] in the settings of
Messaging, the 4-second illumination after mail reception
does not light.
･
The setting of [At alarm notification] operates only in [Analog
clock] of widget application.
→[Settings]→
Settings
Advertisement
Chapters
Table of Contents
