❖
Sending an entry via infrared
communication
<Example> Sending a phonebook entry
1
From the Application menu, [docomo
phonebook]→[Contacts]→
[Send via Infrared]→[Send one]→Select
contacts to send→[OK]→Set the receiver to
the receive stand-by mode→[OK]
❖
Sending all data via infrared
communication
<Example> Sending all phonebook entries
・
For sending all, set a docomo apps password in advance.
From the Home screen,
→Tap [docomo apps password] to operate for setting. By
default, "0000" is set.
1
From the Application menu, [docomo
phonebook]→[Contacts]→
[Send via Infrared]→[Send all]→[Start]→Enter
a docomo apps password→[OK]→Enter the
same authentication password as the receiver
→[OK]→[OK]→Set the receiver to the receive
stand-by mode→[OK]
→[Others]→
→[Settings]→[docomo service]
→[Others]→
❖
Receiving via infrared communication
<Example> Receiving a phonebook entry
・
For receiving all, set a docomo apps password in advance.
From the Home screen,
→Tap [docomo apps password] to operate for setting. By
default, "0000" is set.
1
From the Application menu, [Infrared]
2
[Receive]→[OK]→[OK]→[OK]
Receive all phonebook entries :
docomo apps password→[OK]→Enter the same
authentication password as the one entered on the
sender→[OK]→[OK]→[OK]→[Save]
・
If an account selection screen appears, select an
account.
®
Bluetooth
You can connect the terminal and a Bluetooth device to perform
wireless communication or play voice sound or music.
・
Note that using Bluetooth connection makes battery
consumption faster.
・
Wireless communication is not guaranteed for all Bluetooth
devices.
124
→[Settings]→[docomo service]
[Receive all]→Enter the
communication
File management