Wireless & Networks - NTT docomo Arrows Kiss F-03E Instruction Manual

✔INFORMATION
･
To use USB debugging function for [Developer options],
install USB driver to a PC. For details, refer to the information
about this product in the following site.
http://spf.fmworld.net/fujitsu/c/develop/sp/android/ (in
Japanese only)
･
For functions for software developers such as USB
debugging, Allow mock location, etc. in [Developer options],
refer to the following website.
http://developer.android.com/
WIRELESS & NETWORKS
◆ Setting access point (APN)
Access points for connecting to the Internet (sp-mode, mopera
U) are already registered. You can add or change it if
necessary.
･
By default, sp-mode is set for the usual access point.
･
When Tethering is set to on, access point setting is
unavailable.→P94
❖
Checking the access point in use
1
From the Home screen,
WIRELESS & NETWORKS, [More...]→[Mobile
networks]→[Access Point Names]
❖
Adding new access point (New APN)
･
Do not change the MCC/MNC to other than 440/10. The
setting disappears from the screen.
1
From the Home screen,
WIRELESS & NETWORKS, [More...]→[Mobile
networks]→[Access Point Names]
2
→[New APN]
3
[Name]→Enter a network profile→[OK]
4
[APN]→Enter the access point name→[OK]
88
→[Settings]→In
→[Settings]→In
Settings