Charging - NTT docomo Arrows Kiss F-03E Instruction Manual

e Press
marked parts firmly to close securely.
･
Check if there are no gaps in order to maintain
waterproofness/dustproofness, and attach securely.
* "Waterproofness/Dustproofness"→P22
■ Removing
a Perform Step a in Attaching the battery pack
b Put your fingernail to the groove of the battery pack and lift
it up in the direction of the arrow to remove

Charging

❖
Precautions on charging
･
If you use the terminal while charging, it may take time to
complete charging or charging may not complete.
･
It is normal for the terminal or AC adapter to become warm
while charging. When the terminal becomes warm, charging
may stop temporarily for the safety. When the terminal
becomes extremely hot, stop using immediately.
･
The following conditions will lead to a charging error and
the indicator LED turns off. Charging restarts when the
charging becomes possible.
- When the power voltage of the charger becomes out of
chargeable range
- When temperature of the battery pack or the terminal
becomes out of chargeable range
･
If charging takes for very long time, a charging error is
notified and the indicator LED turns off. Remove the
terminal from the charger and retry.
･
When power voltage of the battery pack is abnormal,
charging error occurs and the indicator LED flashes. Remove
the terminal from the charger or remove the battery pack
and then recharge it.
･
While charging, iC transmission, Reader/Writer, P2P and
Android Beam are not available.
･
When charging starts with the battery empty, the terminal
may not be immediately activated after turning the power
ON. In this case, charge the terminal while keeping it turned
OFF, and turn it ON after a while.
Groove
34
Before using the terminal