Wi-Fi Tethering - NTT docomo Arrows Kiss F-03E Instruction Manual

❖

Wi-Fi tethering

You can allow Wi-Fi devices to access the Internet by using the
terminal as Wi-Fi hotspot.
･
You can connect up to 8 Wi-Fi devices.
･
Only 2.4 GHz is supported for tethering.
■ Setting Wi-Fi tethering
Set Wi-Fi tethering to ON for connection setting.
･
By default, [WPA/WPA2 PSK] is set for Security and random
characters are set for [Password]. Make the security setting
as required.
1
From the Home screen,
WIRELESS & NETWORKS, [More...]→
[Tethering]
2
[Wi-Fi tethering]
3
Check the alert and [OK]
4
[Network SSID]→Enter a network SSID
･
By default, "F-03E_AP" is set.
･
When changing registered setting, select [Configure Wi-
Fi hotspot] to display the setting screen.
5
[Security]→Select a security
･
Security can be set to [Open], [WEP64], [WEP128], [WPA
PSK TKIP], [WPA PSK AES], [WPA2 PSK AES] or [WPA/
WPA2 PSK].
6
[Password]→Enter a password→[Save]
→[Settings]→In
95
❖
Simple registration of Wi-Fi device
Register Wi-Fi device supporting AOSS™ or WPS.
･
Set Wi-Fi tethering to ON in advance.
1
From the Home screen,
WIRELESS & NETWORKS, [More...]→
[Tethering]→[Easy Wi-Fi registration]
2
Select a registration method
AOSS™ system : [AOSS system]→Press AOSS™ button
on the Wi-Fi device
WPS system : [WPS system]→[Push button system]/[PIN
entry system]→Set required items→On the
registration screen, [OK]
･
In case of push button method, press a dedicated button
on an access point. In case of PIN entry method, enter
PIN code displayed on the Wi-Fi device and tap [OK].
✔INFORMATION
･
When number of AOSS™ registration devices exceeds 24, a
confirmation screen for deleting old registration appears. To
use AOSS™ connection with new device, tap [Yes].
･
To cancel AOSS™ setting, on the [Configure Wi-Fi hotspot]
screen, tap [AOSS OFF].
･
For some Wi-Fi devices, AOSS™ connection may not be
established. If connection is failed, use WPS connection or
connect manually.
･
Only 2.4 GHz is supported for AOSS™ system.
→[Settings]→In
Settings