Before Using The Terminal - NTT docomo Arrows Kiss F-03E Instruction Manual

Table of Contents

Advertisement

Before using the terminal

This terminal supports LTE, W-CDMA, GSM/GPRS, Wireless
LAN System.
Because your terminal uses wireless transmission, it may
not function in locations where it is difficult for radio waves
to penetrate, such as tunnels, underground passages and
some buildings, in areas where radio waves are weak, or out
of Xi and FOMA service area. Even when you are high up in
a tall building or condominium and nothing blocks your
view outside, your terminal may not be able to receive or
transmit signals. Also, communication may be interrupted
even when there are strong radio waves with 4 signal status
icons on the terminal and you are not moving (traveling).
Because your terminal uses radio waves to communicate, it
is possible that a third party may attempt to tap your calls.
However, the LTE, W-CDMA, GSM/GPRS automatically
applies a confidential communication function to all calls, so
even if a third party could somehow tap a call, they only hear
noise.
Your terminal encodes voice communication as digital data.
When you are operating your terminal while moving to a
location subject to weaker radio wave conditions, the
transmitted digital data may not be correctly decoded and as
a result the decoded voice may differ somewhat from the
actual voice.
Maintain a separate record of the data (contacts, schedule,
memos, etc.) you saved in the terminal. Note that DOCOMO
assumes no responsibility for any loss of saved contents of
data resulting from malfunction, repair, changing of the
model or other handling of the terminal.
In the terminal, as it is for a PC, some applications that you
install may give instability of the operation, or may send
your location information or personal information
registered to the terminal to outside via the Internet and the
information may be used improperly. Please thoroughly
check a provider and operation status of the application etc.
which you want to use beforehand and then use it.
You are recommended to save important data to microSD
card or a PC.
This terminal supports Xi Area, FOMA Plus-Area and FOMA
HIGH-SPEED Area.
The terminal does not support i-mode sites (programs) or
i-αppli.
You can use the terminal only with docomo mini UIM card.
If you have a UIM or FOMA card, bring it to a docomo Shop
to replace.
Even in Manner mode, shutter sound, auto focus lock sound,
count down sound for self timer, and Find Me Ringtone
sound for Bluetooth Low Energy Settings are emitted.
You can check your own phone number in the following
step.
From the Application menu, [docomo phonebook]→[My
profile]
The terminal automatically performs communication for
some functions, for example, to synchronize data, check the
latest software or maintain connection with the server. If you
transmit a large amount of data such as downloading
applications or watching video, a packet communication
charge becomes high. Subscription of packet flat-rate
service is highly recommended.
Depending on the applications or service you use, packet
communication charge may be applied even in Wi-Fi
communication.
4
Contents/Precautions

Advertisement

Table of Contents
loading

Table of Contents