Android Beam - NTT docomo Arrows Kiss F-03E Instruction Manual

❖

Android Beam

Transfer data between the terminal and a Reader/Writer, P2P
equipped terminal.
･
To use Android Beam, set to allow data transfer beforehand.
･
When "Lock NFC/Osaifu-Keitai" is activated, Android Beam
cannot be used.
･
Android Beam cannot be used on some applications. Data
you can send or receive varies by application.
･
Data transfer is not guaranteed for all Reader/Writer, P2P
equipped terminals.
1
From the Home screen,
WIRELESS & NETWORKS, [More...]→[NFC/
Osaifu-Keitai Settings]
･
If [Lock NFC/Osaifu-Keitai] is marked, unmark the
checkbox.
2
Mark [Reader/Writer, P2P]
3
Mark [Android Beam]
Android Beam becomes available.
→[Settings]→In
133
❖
Transferring content on the screen
You can transfer content shown on the screen such as
websites and maps, only by holding
other's terminal.
1
Activate each other's Android Beam function
2
Show website, map, etc. to transfer on the
sender's terminal
3
Hold mark over each other's terminal
When the terminal detects the other terminal, beep sound
is emitted, the screen content on the sender's terminal is
zoomed out and "Tap to Beam" appears.
4
Tap the screen content to transfer
The content shown on the sender's terminal is transferred
and appears on the receiver's screen.
mark over each
Applications