Basic Operation - NTT docomo Arrows Kiss F-03E Instruction Manual

■ Changing the Home application
[docomo Palette UI] is set in Home screen for the first
activation. To change to [NX!Home] etc., from the Home
→[Settings]→[Display]→Select a home
screen,
application to switch to from [Homescreen selector].
◆ Turning power OFF
Press and hold X until the phone options menu
1
appears
2
[Power off]→[OK]
The terminal turns off vibrating.
Restarting : [Restart]

Basic operation

◆ Using touch panel
You can operate the terminal by directly touching with your
finger or the included Touch pen F03.
･
Set whether to vibrate when tapping is recognized (Distinct
touch →P98).
❖
Notes for using the touch panel
The touch panel is designed for being touched lightly with
fingers or the included Touch pen F03. Do not push it forcibly
with a finger or the touch pen, or press it with sharp objects
(nail, ballpoint pen, pin, etc.).
･
Touching the touch panel may not work in the following
cases. Note that it may cause malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation with the touch panel wet
- Operation with finger wet by sweat or water
- Operation under water
･
When using the touch pen, remove the cap and operate the
touch pen holding its body. And use the touch pen so as to
touch its black tip on the touch panel.
･
If you tilt the touch pen too much against the touch panel,
the touch pen does not work properly.
❖
Tap/Double-tap
Tap : Touch the screen lightly and release the finger. Operation
can be valid at the instant of releasing your finger or the
touch pen from the screen.
Double-tap : Tap twice quickly.
39
Example : Tap
Before using the terminal