Screen brightness up : Set (ON/OFF) whether to make the
screen brighter.
Camera settings : Tap [Restore to defaults] to restore the
camera settings to be default.
❖
Shooting setting menu icons for videos
Tap the shooting setting menu tab displayed on the video
shooting screen to open the following menu.
■ Flash mode
Set to [ON] to light the camera light.
■ White balance
Adjust coloring to match the surrounding light source.
■ Video quality
Select a video quality.
■ Video size
Select recording size.
◆ Barcode reader
JAN code (JAN8, JAN13), NW7 code, CODE39 code, QR code
data can be read and used.
・
QR code cannot be scanned for some versions (type and
size).
・
Scratches, dirt, damages, low print quality and the strong
reflection of light may disable code reading.
❖
Reading barcode
・
If the code is not scanned well, try to change the distance
between the code and camera, the angle or direction of
camera.
1
From the Application menu, [Still camera]→
→[Switch to Barcode Reader]
・
Alternatively, on the still image shooting/video
shooting screen, tap
2
Display barcode on the shooting screen→Scan
or tap on the shooting screen
A confirmation sound is played when scanning is
complete and the scanned data appears.
Scanning divided data :
One data item divided into multiple (up to 16) QR codes
can be scanned and be displayed as a combined data.
Continue reading if unscanned data exists.
Switching between still image shooting and video
shooting :
[Video]
Turning the light ON/OFF :
[Turn OFF picture light]
Displaying history :
Displaying Help :
Adjusting flicker :
[50Hz(East-Japan)]/[60Hz(West-Japan)]
3
Check scanned data
Saving data :
153
to switch.
→[Camera switch]→[Still images]/
→[Turn ON picture light]/
→[History]
→[Help]
→[Adjust flicker]→[Auto]/
→[Save to history]→Tap history field
Applications