Microsd Card - NTT docomo XPERIA A SO-04E with Series Instruction Manual

Removing docomo mini UIM
card
Open the docomo mini UIM card
1
slot cover, put your fingertip on
the protrusion of the tray to pull
the tray straight out, and remove it
from the terminal.
Remove the docomo mini UIM card
2
from the tray ( ), insert the tray to
the terminal, and press it straight
into the terminal all the way.
Check the direction of the tray when
･
inserting.
Close the docomo mini UIM card
3
slot cover, firmly press it and make
sure that there are no gaps
between the terminal and cover
(P.31).

microSD card

You can use microSD card for any other
compatible devices.
The terminal supports microSD card of up to
･
2GB, and microSDHC card of up to 32GB,
microSDXC card of up to 64GB (As of January,
2013).
For compatible microSD cards, contact
･
manufacturers of microSD cards.
A microSDXC card can be used only on a
･
compatible device. Inserting a microSDXC
card into a non-microSDXC-compatible
device may damage or destroy data saved on
the microSDXC card. Do not insert one.
If you want to reuse a microSDXC card on
･
which data is destroyed, format microSDXC
card (all data will be erased) on an SDXC-
compatible device.
When copying data to/from a non-SDXC-
･
compatible device, use a card (microSDHC
card or microSD card) complying with
standards of device to share data.
Before Using the Terminal
32