Character Entry; Screen Shot - NTT docomo Arrows Kiss F-03E Instruction Manual

◆ Switching the portrait/landscape view
The terminal supports a motion sensor that senses orientation
or motion of the terminal. You can switch display view by
tilting the terminal vertical or horizontal (Auto-rotate screen→
P101).
･
Even when you change the orientation of the terminal, the
screen may not change depending on the screen displayed.
･
Hold the terminal with your hands and shake it 2 times or
more, then the terminal returns and fixes to portrait view
from landscape view changed by auto rotate (Shake to
unrotate→P102).

◆ Screen shot

You can save a screen displayed on the terminal as an image.
･
Some screens may not be saved.
Press X and D at the same time (1 sec. or
1
more)
To check the image, open the Notification panel and tap a
notification for screen shot, or from the Application menu,
tap [Gallery]→[Screenshots].

Character entry

Enter characters using software keyboard displayed on the
screen.
･
Entering characters with NX!input is mainly described in
this section.
･
Switching to other input method is available.→P46
･
You can connect an external keyboard to enter characters.→
P48
◆ Using keypad
You can enter characters using numeric keypad, QWERTY
keypad or handwritten input.
･
You can activate voice input from each keypad.→P45
･
When Overwrite handwritten input is valid in Handwritten
input setting of keyboard settings, handwritten input is
available with the numeric or QWERTY keypad displayed.
Overwrite handwritten input is enabled by default.→P46
■ Numeric keypad
This is a widely used keypad on a mobile phone. 3 types of
input methods can be used : Flick input, Numeric keypad input,
Gesture input.→P43
a
b
41
c
Before using the terminal