Numeric Keypad Input Mode - NTT docomo Arrows Kiss F-03E Instruction Manual

d Handwritten input area : Write a character with your finger
to enter.
･
When you write a character, a recognized character
appears on the top of input area.
･
Tap the recognized character to select character to be
replaced with from the candidates list. You can rewrite to
show other candidates.
❖
Displaying/hiding keyboard
■ Displaying the keypad
1
Select the text input field
■ Hiding keypad (Numeric keypad and QWERTY
keypad)
1
Tap to display the guide→Slide the guide to
a desired direction→After
to again and release the finger
■ Hiding keypad (Handwritten input)
1
Recognized
character
Correction
candidate
turns to , slide
❖
Switching keypad
■ Numeric keypad and QWERTY keypad
1
When the numeric keypad or QWERTY keypad
is displayed,
■ Handwritten input
1
When the numeric keypad or QWERTY keypad
is displayed, touch and hold
without lifting your finger
Switch to the numeric keypad or QWERTY keypad :
the handwritten input is displayed,
❖

Numeric keypad input mode

You can use the following 3 input methods in the numeric
keypad.
･
Select an input mode in "Numeric keypad settings" of the
keypad setting. By default, "Numeric keypad input" is set.→
P46
■ Flick input
If you touch and keep on the key assigned the character you
want to enter, characters (flick guide) will be displayed on that
key. Flick towards the desired character without releasing your
finger from the screen.
･
To enter voiced/semi-voiced sound or small characters, tap
once or twice after flicking.
■ Numeric keypad input mode
Tap continuously a key assigned the character you want to
enter until the desired character is displayed.
43
→Slide it to
When
Before using the terminal