Flash On Time - Datalogic QuickScan I QM21X1 Product Reference Manual

Enter/Exit Programming Mode

Flash On Time

This feature specifies the ON time for the indicator LED while in Flash Mode.
The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100
millisecond increments. See
programming instructions.
$CSNFN
Select Flash ON Time Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
84
OA = Flash is ON for 1 Second
DEFAULT
"Flash On Time" on page 301 for more detailed
QuickScan™ I QM21X1 / QBT21X1
Scanning Features
~
CANCEL