Global Aim Id - Datalogic QuickScan I QM21X1 Product Reference Manual

characters in
than the expected string of 20 characters are selected, scan the ENTER/EXIT bar
code to terminate the string. Reference the section,
page 289, for more information. Exit programming mode by scanning the
ENTER/EXIT bar code once again.

Global AIM ID

AIM label identifiers (as opposed to custom characters you select yourself as
with label identifiers) can be included with scanned bar code data. AIM label
identifiers consist of three characters as follows:
• A close brace character (ASCII ']'), followed by...
• A code character (see the table below), followed by...
• A modifier character (the modifier character is symbol dependent).
SYMBOLOGY
UPC/EAN
Code 39 and
Code 32
Codabar
Interleaved 2 of 5
Code 93
a. UPC-A and UPC-E labels are converted to EAN 13 when adding AIM
b. ISBN (X with a 0 modifier character)
Figure 9. AIM ID
290
Appendix D, Keypad
This feature enables/disables addition of AIM IDs for all sym-
bology types.
NOTE
CHAR
a
E
A
F
I
G
IDs.
Prefix Label ID AIM ID
representing your desired character(s). If less
"Example: Setting a Prefix"
SYMBOLOGY
Code 128/GS1-128
GS1 DataBar Omnidirec-
tional, GS1 DataBar
Expanded
Standard 2 of 5
ISBN
Code 11
Bar Code Data
QuickScan™ I QM21X1 / QBT21X1
CHAR
C
e
S
b
X
H
Label ID Suffix
on