Standard 2 Of 5 Set Length 1 - Datalogic QuickScan I QM21X1 Product Reference Manual

Enter/Exit Programming Mode

Standard 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Control on page
on page 203
Mode. Length includes the bar code's check and data characters.
The length can be set from 1 to 50 characters. See
for more detailed programming instructions.
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
204
203. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
$CS2L1
08 = Length 1 is 8 Characters
DEFAULT
Standard 2 of 5
Standard 2 of 5 Length
Variable Length
Fixed Length on page 203
"Set Length 1" on page 304
~
CANCEL
QuickScan™ I QM21X1 / QBT21X1