Enter/Exit Programming Mode
GS1 DataBar Expanded Set Length 2
This feature specifies one of the bar code lengths for
Length Control on page
able Length on page 128
page 128
The length can be set from 1 to 74 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
more detailed programming instructions.
Select GS1 DataBar Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
130
128. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
Mode. Length includes the bar code's data characters only.
$CXBL2
74 = Length 2 is 74 Characters
DEFAULT
GS1 DataBar
GS1 DataBar Expanded
Fixed Length on
"Set Length 2"
on page 305 for
~
CANCEL
QuickScan™ I QM21X1 / QBT21X1
TM
Expanded
Vari-