Locking The Reader To The Base - Datalogic QuickScan I QM21X1 Product Reference Manual

Host Connection:
patible with your host equipment.
The QuickScan QBT21X1 can be set up to require a PIN code when connecting to the host. If
you are adding new equipment to a system that uses a custom security PIN. See "Connect-
ing the Base when Security Pin is Enabled," starting on page 8 for more information.
NOTE
Most connections plug directly into the host device as shown in
board Wedge interface cables have a 'Y' connection where its female end mates
with the male end of the cable from the keyboard and the remaining end at the
keyboard port on the terminal/PC.
Figure 2. Connecting to the Host
Power Connection:
into the wall, ensure cable is facing downwards (as shown in
undue strain on the socket.

Locking the Reader to the Base

The Base Station provides a locking mechanism to ensure electrical contact
between Reader and Base, in case of inadvertent movements.
6
Verify before connection that the reader's cable type is com-
or...
Plug the AC Adapter into an approved AC socket. If plugged
Figure
Figure 1) to prevent
Lock
Lever
QuickScan™ I QM21X1 / QBT21X1
2. Key-