Reading Parameters
Good Read LED Duration
This feature specifies the amount of time that the Good Read LED remains on
following a good read. The good read LED on time can be set within a range of
0.1 to 25.5 seconds in 100ms increments. See
page 298 for more detailed programming instructions.
Select Good Read LED Duration Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
$CLAGL
03 = Good Read LED stays on for 0.3
DEFAULT
seconds.
Indicators are dimmed during sleep.
NOTE
Enter/Exit Programming Mode
"Good Read LED Duration"
~
CANCEL
on
79