Copy Configuration To Base Station; Batch Features; Batch Mode - Datalogic QuickScan I QM21X1 Product Reference Manual

Copy Configuration to Base Station

Scan the following label to copy the current scanner configuration to the Base
Station. Use this method when the Auto Configuration Update feature is dis-
abled and you want a one-time configuration update to be performed on the
Base Station.
NOTE

Batch Mode

This option specifies whether to store labels in the handheld while discon-
nected from the base. Options are as follows:
• Disabled — The handheld will not store/batch labels.
• Automatic — The handheld will store labels to RAM when the handheld
goes out of range and is disconnected from the remote device.
• Manual — The handheld will always store labels to Flash memory. The user
must manually send the stored labels to the remote device using a special
"batch send" label.
DEFAULT
Batch Mode = Automatic
262
Copy Configuration to Base Station
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.

BATCH FEATURES

Enter/Exit Programming Mode
Batch Mode = Disabled
Batch Mode = Manual
QuickScan™ I QM21X1 / QBT21X1