Beep Volume
Selects the beeper volume (loudness) of radio-specific beep indications. There
are three selectable volume levels.
Beep Volume = Low
Beep Volume = High
Disconnect Beep
Enables/disables the beep indication that a handheld has become connected or
disconnected from a Base Station.
NOTE
DEFAULT
STAR default
Disconnect Beep = Enable
258
The defaults are different for the STAR and BT models.
Enter/Exit Programming Mode
Beep Volume = Medium
DEFAULT
Disconnect Beep = Disable
DEFAULT
BT default
QuickScan™ I QM21X1 / QBT21X1