I 2 Of 5 Set Length 2 - Datalogic QuickScan I QM21X1 Product Reference Manual

Symbologies

I 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
page
the second fixed length if in Fixed Length Mode. The length includes the bar
code's check and data characters.
The length can be set from 2 to 50 characters in increments of two. A setting of
0 specifies to ignore this length (only one fixed length). See
page 305 for more detailed programming instructions.
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
163. Length 2 is the maximum label length if in Variable Length Mode, or
$CI2L2
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
I 2 of 5 Length Control on
"Set Length 2"
~
CANCEL
on
165