Datalogic 2 Of 5 Set Length 1 - Datalogic QuickScan I QM21X1 Product Reference Manual

Symbologies

Datalogic 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Control on page
Mode, or the first fixed length if in Fixed Length Mode. The length includes the
bar code's check and data characters.
The length can be set from 2 to 50 characters in increments of two. Length
includes the bar code's data characters. See
detailed programming instructions.
Select Datalogic 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
170. Length 1 is the minimum label length if in Variable Length
$CD2L1
06 = Length 1 is 6 Characters
DEFAULT
Enter/Exit Programming Mode
Datalogic 2 of 5 Length
"Set Length 1" on page 304 for
~
CANCEL
171