Data Format
Label ID: Set Individually Per Symbology
This feature configures a Label ID individually for a single symbology.
NOTE
Label ID Control
This option controls whether a Label ID is disabled, or sent as a prefix or suffix
for a given symbology type.
DEFAULT
$CIDCO01
Label ID Transmission = Enable as Prefix
Product Reference Guide
This setting requires the scanning of bar codes from multiple sections. See
"Label ID: Set Individually Per Symbology" on page 293 for more
detailed programming instructions.
~
CANCEL
Enter/Exit Programming Mode
$CIDCO00
Label ID Transmission = Disable
$CIDCO02
Label ID Transmission = Enable as Suffix
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
59