Intercode Delay - Datalogic QuickScan I QM21X1 Product Reference Manual

Keyboard Interface

Intercode Delay

Specifies the delay between labels transmitted to the host for this interface. The
selectable range for this feature is from 0 to 99 seconds. See
on page 287 for more detailed programming instructions.
Set Intercode Delay
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
$CKBID
00 = No Wedge Intercode Delay
DEFAULT
Enter/Exit Programming Mode
"Intercode Delay"
~
CANCEL
49