Redistributing Mpls Ldp Routes Into Bgp - Cisco ASR 9000 Series Configuration Manual

Implementing MPLS Label Distribution Protocol
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 mpls ldp
Example:
RP/0/RSP0/CPU0:router(config)# mpls
ldp
Step 3
downstream-on-demand
Example:
RP/0/RSP0/CPU0:router(config-ldp)#
downstream-on-demand with access-list
Step 4
Use the commit or end command.
Related Topics
Downstream on Demand, on page 19

Redistributing MPLS LDP Routes into BGP

Perform this task to redistribute Border Gateway Protocol (BGP) autonomous system into an MPLS LDP.
OL-28381-02
Purpose
Enters global configuration mode.
Enters MPLS LDP configuration mode.
Enters downstream on demand label advertisement mode. The ACL
contains the list of peer IDs that are configured for downstream-on-demand
mode. When the ACL is changed or configured, the list of established
neighbor is traversed.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without committing
the configuration changes.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Redistributing MPLS LDP Routes into BGP
49