Configure Point-To-Multipoint Te: Examples - Cisco ASR 9000 Series Configuration Manual

Configure Point-to-Multipoint TE: Examples

Auto-tunnel Mesh:
History:
Path info (OSPF 100 area 16909060):
Node hop count: 1
Hop0: 23.9.0.2
Hop1: 2.2.2.2
Name: tunnel-te3503
Status:
Config Parameters:
Auto-tunnel Mesh:
Displayed 3 (of 7) heads, 0 (of 3) midpoints, 0 (of 0) tails Displayed 2 up, 1 down, 0
recovering, 0 recovered heads
Related Topics
Enabling an AutoTunnel Backup, on page 167
Removing an AutoTunnel Backup, on page 168
Establishing MPLS Backup AutoTunnels to Protect Fast Reroutable TE LSPs, on page 169
Establishing Next-Hop Tunnels with Link Protection, on page 171
Backup AutoTunnels, on page 117
Configure Point-to-Multipoint TE: Examples
These configuration examples show how to configure Point-to-Multipoint TE:
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
268
Auto-bw: disabled
Fast Reroute: Enabled, Protection Desired: Node, Bandwidth
Path Protection: Not Enabled
Attribute-set: am (type auto-mesh)
Soft Preemption: Disabled
Group ID: 1
Destination list: blah
Unused removal timeout: not running
Tunnel has been up for: 00:06:13 (since Tue Aug 14 23:25:41 EST 2012)
Current LSP:
Uptime: 00:06:13 (since Tue Aug 14 23:25:41 EST 2012)
Destination: 4.4.4.4 (auto-tunnel mesh)
Admin: up Oper: down
path option 10, type dynamic
Last PCALC Error: Tue Aug 14 23:31:26 2012
Info: No path to destination, 4.4.4.4 (affinity)
G-PID: 0x0800 (derived from egress interface properties)
Bandwidth Requested: 100 kbps
Creation Time: Tue Aug 14 23:25:41 2012 (00:06:13 ago)
Bandwidth: 100 kbps (CT0) Priority:
Number of affinity constraints: 2
Include bit map
Include name
Exclude bit map
Exclude name
Metric Type: TE (default)
Hop-limit: disabled
AutoRoute: disabled LockDown: disabled
Forwarding-Adjacency: disabled
Loadshare: 0 equal loadshares
Auto-bw: disabled
Fast Reroute: Enabled, Protection Desired: Node, Bandwidth
Path Protection: Not Enabled
Attribute-set: am (type auto-mesh)
Soft Preemption: Disabled
Group ID: 1
Destination list: blah
Unused removal timeout: not running
Path: not valid Signalling: Down
CT0
2 2
: 0x8
: yellow
: 0x2
: red
Policy class: not set
Implementing MPLS Traffic Engineering
OL-28381-02