Cisco ASR 9000 Series Configuration Manual page 227

Implementing MPLS Traffic Engineering
Command or Action
Step 5
bw-limit {min bandwidth } {max bandwidth}
Example:
RP/0/RSP0/CPU0:router(config-if-tunte-autobw)#
bw-limit min 30 max 80
Step 6 adjustment-threshold percentage [min
minimum-bandwidth]
Example:
RP/0/RSP0/CPU0:router(config-if-tunte-autobw)#
adjustment-threshold 50 min 800
Step 7 overflow threshold percentage [min bandwidth] limit
limit
Example:
RP/0/RSP0/CPU0:router(config-if-tunte-autobw)#
overflow threshold 100 limit 1
OL-28381-02
Purpose
Configures the minimum and maximum automatic bandwidth set
on a tunnel.
min
max
Configures the tunnel bandwidth change threshold to trigger an
adjustment.
percentage
min
Configures the tunnel overflow detection.
percentage
limit
min
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring the Automatic Bandwidth
Applies the minimum automatic bandwidth in kbps on a
tunnel. Range is from 0 to 4294967295.
Applies the maximum automatic bandwidth in kbps on a
tunnel. Range is from 0 to 4294967295.
Bandwidth change percent threshold to trigger an adjustment
if the largest sample percentage is higher or lower than the
current tunnel bandwidth. Range is from 1 to 100 percent.
The default value is 5 percent.
Configures the bandwidth change value to trigger an
adjustment. The tunnel bandwidth is changed only if the
largest sample is higher or lower than the current tunnel
bandwidth. Range is from 10 to 4294967295 kilobits per
second (kbps). The default value is 10 kbps.
Bandwidth change percent to trigger an overflow. Range is
from 1 to 100 percent.
Configures the number of consecutive collection intervals
that exceeds the threshold. The bandwidth overflow triggers
an early tunnel bandwidth update. Range is from 1 to 10
collection periods. The default value is none.
Configures the bandwidth change value in kbps to trigger
an overflow. Range is from 10 to 4294967295. The default
value is 10.
211