Configure Ietf Ds-Te Tunnels: Example - Cisco ASR 9000 Series Configuration Manual

Implementing MPLS Traffic Engineering
commit
show mpls traffic-eng tunnels backup
show mpls traffic-eng fast-reroute database
!
rsvp
commit
Related Topics
Building MPLS-TE Topology, on page 155
Creating an MPLS-TE Tunnel, on page 158
How MPLS-TE Works, on page 116

Configure IETF DS-TE Tunnels: Example

The following example shows how to configure DS-TE:
rsvp
interface pos 0/6/0/0
bandwidth rdm 100 150 bc1 50
mpls traffic-eng
ds-te mode ietf
interface tunnel-te 1
bandwidth 10 class-type 1
commit
configure
rsvp interface 0/6/0/0
bandwidth mam max-reservable-bw 400 bc0 300 bc1 200
mpls traffic-eng
ds-te mode ietf
ds-te model mam
interface tunnel-te 1bandwidth 10 class-type 1
commit
rsvp
interface pos 0/6/0/0
bandwidth rdm percentage bc0 100 bc1 50
bandwidth 10 class-type 1
commit
configure
rsvp interface 0/6/0/0
bandwidth mam percentage bc0 100 bc1 50
ds-te mode ietf
ds-te model mam
bandwidth 10 class-type 1
commit
Related Topics
Configuring a Prestandard DS-TE Tunnel, on page 173
Prestandard DS-TE Mode, on page 121
OL-28381-02
interface pos 0/6/0/0
bandwidth 100 150 sub-pool 50
interface tunnel-te1
bandwidth sub-pool 10
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configure IETF DS-TE Tunnels: Example
253