Configuring Acl-Based Prefix Filtering; Configuring Acls For Prefix Filtering - Cisco ASR 9000 Series Configuration Manual

Implementing RSVP for MPLS-TE
Command or Action
Related Topics
Graceful Restart: Standard and Interface-Based, on page 66
Enable Graceful Restart: Example, on page 100
Enable Interface-Based Graceful Restart: Example, on page 100

Configuring ACL-based Prefix Filtering

Two procedures are provided to show how RSVP Prefix Filtering is associated:
•
•

Configuring ACLs for Prefix Filtering

Perform this task to configure an extended access list ACL that identifies the source and destination prefixes
used for packet filtering.
The extended ACL needs to be configured separately using extended ACL configuration commands.
Note
SUMMARY STEPS
1. configure
2. rsvp
3. signalling prefix-filtering access-list
4. Use the commit or end command.
OL-28381-02
Configuring ACLs for Prefix Filtering, on page 77
Configuring RSVP Packet Dropping, on page 78
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring ACL-based Prefix Filtering
Purpose
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without committing
the configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
77