Prerequisites For Implementing Gmpls Uni - Cisco ASR 9000 Series Configuration Manual

Implementing GMPLS UNI
The Generalized Multiprotocol Label Switching (GMPLS) User Network Interface (UNI) creates a circuit
connection between two clients (UNI-C) of an optical network. This connection is achieved by signaling
exchanges between UNI Client (UNI-C) and UNI Network (UNI-N) nodes, where UNI-C nodes are router
nodes and UNI-N nodes are optical nodes.
A GMPLS overlay model is required to connect packet routers with the optical network in these scenarios:
• Different groups within a service provider are responsible for managing packet and optical networks.
• The optical and packet network are managed by different service providers.
• There is a weak trust model between the entities operating the optical and packet networks.
Feature History for Implementing GMPLS UNI
Release
Release 4.3.0
•
•
•
•
•
•

Prerequisites for Implementing GMPLS UNI

The following prerequisites are required to implement GMPLS UNI:
OL-28381-02
Prerequisites for Implementing GMPLS UNI, page 277
Restrictions for Implementing GMPLS UNI, page 278
Information About Implementing GMPLS UNI, page 278
How to Implement GMPLS UNI, page 280
Configuration Examples for GMPLS UNI, page 295
Additional References, page 297
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
C H A P T E R
Modification
This feature was introduced.
6
277