How To Implement Rsvp Authentication; Configuring Global Configuration Mode Rsvp Authentication; Enabling Rsvp Authentication Using The Keychain In Global Configuration Mode - Cisco ASR 9000 Series Configuration Manual

How to Implement RSVP Authentication

Command or Action
traps rsvp all
Step 5 Use the commit or end command.
Related Topics
RSVP MIB, on page 68
Enable RSVP Traps: Example, on page 101
How to Implement RSVP Authentication
There are three types of RSVP authentication modes—global, interface, and neighbor. These topics describe
how to implement RSVP authentication for each mode:

Configuring Global Configuration Mode RSVP Authentication

These tasks describe how to configure RSVP authentication in global configuration mode:

Enabling RSVP Authentication Using the Keychain in Global Configuration Mode

Perform this task to enable RSVP authentication for cryptographic authentication by specifying the keychain
in global configuration mode.
You must configure a keychain before completing this task (see Cisco ASR 9000 Series Aggregation
Note
Services Router System Security Configuration Guide).
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
84
Purpose
commit—Saves the configuration changes and remains within
the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without committing
the configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Implementing RSVP for MPLS-TE
OL-28381-02