Configuring The Window Size For An Interface For Rsvp Authentication - Cisco ASR 9000 Series Configuration Manual

Implementing RSVP for MPLS-TE
Command or Action
Related Topics
RSVP Authentication Design, on page 69
RSVP Authentication by Using All the Modes: Example, on page 103

Configuring the Window Size for an Interface for RSVP Authentication

Perform this task to configure the window size for an interface for RSVP authentication to check the validity
of the sequence number received.
SUMMARY STEPS
1. configure
2. rsvp interface type interface-path-d
3. authentication
4. window-size N
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
rsvp interface type interface-path-d
Example:
RP/0/RSP0/CPU0:router(config)# rsvp
interface POS 0/2/1/0
RP/0/RSP0/CPU0:router(config-rsvp-if)#
OL-28381-02
Purpose
• Yes— Saves configuration changes and exits the
• No—Exits the configuration session without committing the
• Cancel—Remains in the configuration mode, without
Purpose
Enters global configuration mode.
Enters RSVP interface configuration mode.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
Configuring an Interface for RSVP Authentication
configuration session.
configuration changes.
committing the configuration changes.
91