Cisco ASR 9000 Series Configuration Manual page 280

Configure the MPLS-TE Auto-Tunnel Backup: Example
RP/0/RSP0/CPU0:router# show mpls traffic-eng tunnels tabular
------------------ ------ --------------- --------------- ------- ------- ------ -----
tunnel-te50
tunnel-te60
tunnel-te70
tunnel-te80
This example shows the auto-tunnel backup details.
RP/0/RSP0/CPU0:router#
Name: tunnel-te400
Status:
Admin:
path option 20,
path option 10,
G-PID: 0x0800 (derived from egress interface properties)
Bandwidth Requested: 0 kbps
Creation Time: Thu Aug 16 18:30:41 2012 (00:01:28 ago)
Config Parameters:
Bandwidth:
Metric Type: TE (default)
Metric Type: TE (default)
Hop-limit: disabled
AutoRoute: disabled
Forwarding-Adjacency: disabled
Loadshare:
Auto-bw: disabled
Fast Reroute: Disabled, Protection Desired: None
Path Protection: Not Enabled
Soft Preemption: Disabled
Auto Backup:
Protected LSPs: 1
Protected S2L Sharing Families: 0
Protected S2L: 0
Protected i/f: Gi0/1/0/3
Attribute-set: ab1
Protection: NNHOP
Unused removal timeout: not running
Path Option Details:
10: Explicit Path Name: (autob_nnhop_srlg_te400)
20: Explicit Path Name: (autob_nnhop_te400)
SNMP Index: 221
History:
Tunnel has been up for: 00:00:34 (since Thu Aug 16 18:31:35 EST 2012)
Current LSP:
Uptime: 00:00:34 (since Thu Aug 16 18:31:35 EST 2012)
Current LSP Info:
Instance: 2, Signaling Area: OSPF 100 area 1.2.3.4
Uptime: 00:00:34 (since Thu Aug 16 18:31:35 EST 2012)
Outgoing Interface: GigabitEthernet0/1/0/2, Outgoing Label: 16000
Router-IDs: local
Soft Preemption: None
Path Info:
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
264
tunnel-te2
tunnel-te50
*tunnel-te60
*tunnel-te70
*tunnel-te80
Tunnel LSP Destination
Name ID
tunnel-te0 549
tunnel-te1 546
tunnel-te2 6
6 200.0.0.3
4 200.0.0.3
4 200.0.0.3
3 200.0.0.3
show mpls traffic-eng tunnels auto-tunnel backup detail
Destination: 1.1.1.1 (auto-tunnel backup)
up Oper: up Path:
type explicit (autob_nnhop_te400) (Basis for Setup, path weight 2)
type explicit (autob_nnhop_srlg_te400) [disabled]
0 kbps (CT0) Priority:
LockDown: disabled
0 equal loadshares
1: exclude-srlg 34.9.0.4
2: exclude-address 34.9.0.3
3: exclude-node 3.3.3.3
1: exclude-address 34.9.0.4
2: exclude-address 34.9.0.3
3: exclude-node 3.3.3.3
4.4.4.4
downstream 2.2.2.2
200.0.0.3 up
200.0.0.3 up
200.0.0.3 up
200.0.0.3 up
200.0.0.3 up
Source
Address Address
200.0.0.3 200.0.0.1
200.0.0.3 200.0.0.1
200.0.0.3 200.0.0.1
200.0.0.1
200.0.0.1
200.0.0.1
200.0.0.1
valid Signalling: connected
CT0
7 7 Affinity: 0x0/0xffff
Policy class: not set
Protected node: 3.3.3.3
Implementing MPLS Traffic Engineering
up
up
up
up
up
FRR LSP
State State Role
up Inact Head InAct
up Inact Head InAct
up Inact Head InAct
up Active Head InAct
up Active Head InAct
up Active Head InAct
up Active Head InAct
Path
Prot
OL-28381-02