Configuring Ldp Downstream On Demand Mode - Cisco ASR 9000 Series Configuration Manual

Configuring LDP Downstream on Demand mode

Command or Action
Step 5
show mpls ldp nsr statistics
Example:
RP/0/RSP0/CPU0:router# show mpls ldp nsr
statistics
Step 6 show mpls ldp nsr summary
Example:
RP/0/RSP0/CPU0:router# show mpls ldp nsr
summary
Step 7 show mpls ldp nsr pending
Example:
RP/0/RSP0/CPU0:router# show mpls ldp nsr
pending
Related Topics
LDP Nonstop Routing, on page 17
Configuring LDP Downstream on Demand mode
SUMMARY STEPS
1. configure
2. mpls ldp
3. downstream-on-demand
4. Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide, Release 4.3.x
48
Implementing MPLS Label Distribution Protocol
Purpose
• No—Exits the configuration session without committing
the configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Displays MPLS LDP NSR statistics.
Displays MPLS LDP NSR summarized information.
Displays MPLS LDP NSR pending information.
OL-28381-02