Konica Minolta CL-70F Operating Manual page 95

NOTICE
Be sure to set Preset Selection to "Not Selected" when no correction is
desired.
3.
Touch the [OK] button.
Confirm and return to the Measurement screen.
To return to the Measurement screen without confirming, touch the Cancel button.
Tool Box Screen
4.
Touch the [Close] button.
Returns to the Measurement screen.
The selected status will be displayed on the status bar.
The preset is set.
The set content is
displayed.
[Close] Button
The selected preset no. is displayed.
82
6. Measurement Tool [Tool Box] Screen