Table of Contents
Advertisement
NOTICE
● When the Light Selection ing
calibration position, the message "Please set Light
Selection Ring for dark calibration." is displayed. Set the
Light Selection ing
(
) to calibrate the system.
● If dark calibration is not successful, "Dark calibration
failed. Please check Light Selection ing position." is
displayed. Set the Light Selection ing
calibration position
6.
Touch the icon to be displayed on the Display Mode Selection
screen.
The display will switch to the selected measurement screen.
Display Mode Selection Screen
7.
Press the Measuring Button
Turn the Light Selection Ring
When measuring ambient light, make sure to select Range L
When measuring flash units, select Range L
depending on the brightness of of the flash.
is not set to the dark
2
to the dark calibration position
2
to the dark
2
(
) to calibrate the system.
5
to measure.
to select the range.
2
7
Dark Calibration Position
Confirmation Screen
Dark Calibration
Confirmation Screen
Measuring Screen
(
(
) or Range H
P77,
P78)
2. Before Use
).
(
)
Hide quick links:
Advertisement
Table of Contents
