Table of Contents
Advertisement
NOTICE
When the Measuring Button
position, the message "Measurement failed. Please check Light
Selection ing position." is displayed. Turn the Light Selection ing
to select the range.
2
NOTE
Measurement and display will take longer in light levels below 30lx. The LCD illumination
will normally switch off during measurement to avoid influence to measurement.
Power OFF
1.
Press and hold the Power Button
The meter will turn OFF.
NOTICE
Please wait 3 seconds between repeated power on and power off sessions.
NOTE
● If the LCD screen shows no display, check if the batteries are installed properly (Pos/Neg
positioning) and have enough capacity.
● All settings and measurements made during use are saved in memory even after the
meter is powered off.
is pressed at the dark calibration
5
3
for 1 second or longer.
8
2. Before Use
Hide quick links:
Advertisement
Table of Contents
