Table of Contents
Advertisement
4.
Press the Measuring Button
The Light Selection Ring
when ta ing ambient light measurements.
When measuring flash units, select Range L
or Range
the flash.
77,
Measurements can now be made.
NOTE
● To measure the color temperature of a light source properly, point Light
Receptor
1
● Measurement and display will ta e longer in light levels below 0l . The
LC illumination will normally switch off during measurement to avoid
influence to measurement.
5.
Observe measurement values on Text Mode.
Measurement Screen Text Mode
6.
Memorize the measurement results.
Measurement results can be memori ed.
To record measurements, press Memory utton
5
to measure.
should be set to L
2
) depending on the brightness of
7 )
directly at light source during reading.
Measurement result
31
4. Setting the Measuring Conditions
Light Selection Ring
)
)
Measuring Button
.
)
7
2
Light
Receptor
1
5
Hide quick links:
Advertisement
Table of Contents
