Measurement In Cord (Pc) Flash Mode - Konica Minolta CL-70F Operating Manual

5-4

Measurement in Cord (PC) Flash Mode

Cord C) Flash Mode is preferable when lighting conditions prevent the use of
cordless measurements or when certain types of equipment require a physical sync
connection.
In Cord C) Flash Mode, the meter and flash unit are connected with a Sync Cord
(sold separately).
CAUTION
●
Do not handle this product with wet hands, or leave it in the rain or in a
location where it may be splashed with water, submerged, or come into
contact with moisture. There is a danger of electric shock in Cord (PC) Flash
Mode. This may also result in damage to the product.
●
When using flash with high voltage, there is a danger of electric shock if
you touch the Sync Terminal
measurement.
Operation
1.
On the Measurement screen, touch the [Measuring Mode] icon
and select the [Cord (PC) Flash Mode] icon on the next screen.
Select the measuring mode. ( P22)
Measurement Screen
5. Measuring Light Sources [Measurement Screen]
. andle the flash with care when using for
b
Measuring Mode Selection Screen
utton Cancel utton