Table of Contents
Advertisement
4.
Press the Measuring Button
The Light Selection Ring
when ta ing ambient light measurements.
When measuring flash units, select Range L
or Range
the flash.
77,
Measurements can now be made.
NOTE
Measurement and display will ta e longer in light levels below 0l . The LC
illumination will normally switch off during measurement to avoid influence to
measurement.
5.
The current measurement value is indicated by a black "x".
6.
Touch the [Memory Selection] icon.
The [CIE1931 (CIE1964) Comp.] screen will be displayed.
CIE1931 (CIE1964) Comp.
Current
Measurement
Memory
Selection] Icon
5
to measure.
should be set to L
2
) depending on the brightness of
7 )
Measured value
CIE1931 (CIE1964) Comp. Memory
Screen
4. Setting the Measuring Conditions
Light Selection Ring
)
)
Measuring Button
Screen
Memory
Selection
Area
2
5
Hide quick links:
Advertisement
Table of Contents
