Table of Contents
Advertisement
5.
Press the Measuring Button
The Light Selection Ring
when ta ing ambient light measurements.
When measuring flash units, select Range L
or Range
the flash.
77,
Measurements can now be made.
NOTE
Measurement and display will ta e longer in light levels below 0l . The LC
illumination will normally switch off during measurement to avoid influence to
measurement.
6.
Touch the [Magnifying Glass (+)] icon on the screen.
The spectrum distribution graph will be enlarged.
The enlarged graph is displayed on the whole screen landscape).
To return to the Spectrum screen, touch the Magnifying
spectrum distribution graph.
Spectrum Screen
Measurement
results are
displayed.
NOTICE
When the enlarged graph is displayed, measurement cannot be
performed.
5
to measure.
should be set to L
2
) depending on the brightness of
7 )
36
4. Setting the Measuring Conditions
Light Selection Ring
)
)
Measuring Button
lass -) icon on the enlarged
Spectrum Distribution Graph
Enlarged Display
2
5
Hide quick links:
Advertisement
Table of Contents
