Konica Minolta CL-70F Operating Manual page 150

2.
Set tristimulus value Y.
If the entered value is within the setting range, the [OK] button is displayed.
If it is outside the setting range, re-enter a value.
(within the setting range)
Input
number
[OK] Button
3.
Touch the [OK] button.
The number is confirmed and the display returns to the page 2 of the Preset
Editing (2°)/(10°) screen.
To return to page
[Cancel] button.
Preset Editing Screen
The tristimulus value Y (illuminance (lx)) is edited.
NOTE
● The edited preset data will be displayed on the Preset Information screen.
● Setting range of tristimulus value Y is 1.0000 to 200,000, although the meter's
measuring range of illuminance l ) is from
( P19)
Y Screen
[Cancel] Button
of the reset diting
(Page 2)
137
7. Meter Settings [Setting] Screen
Y Screen
(outside the setting range)
[Cancel] Button
) 0 ) screen without confirming, touch the
to 00,000l .
Outside the
range