Table of Contents
Advertisement
2.
Set a Exposure Time for ambient measurement.
Select Auto, 0.1 sec or 1.0 sec.
Exposure Time Screen
[OK] Button
3.
Touch the [OK] button.
Confirms and returns to the Tool Box screen.
To return to the Tool o screen without confirming, touch the Cancel button.
The selected status will be displayed on the Tool Box.
Tool Box Screen
The Exposure Time has been set for a fixed 1. second measurement.
NOTE
In Auto mode, the CL-70F automatically selects among 15 measuring times, determined
by the illumination available, to achieve a proper result in a convenient way.
Two fi ed reading times are available to enable e act comparison of multiple
measurements.
When measuring high illuminance levels, set the Exposure Time to 0.1 sec. When
taking measurements in low Illuminance, set the Exposure time for 1.0 sec.
6. Measurement Tool [Tool Box] Screen
The selected button will be displayed
encircled in blue.
[Cancel] Button
The selected exposure
time is displayed on the
Measurement screen.
The selected exposure
time is displayed.
102
Hide quick links:
Advertisement
Table of Contents
