Konica Minolta CL-70F Operating Manual page 89

7.
Monitoring Function is complete.
When the Measuring Button
difference with the preset reference value at the time of release will be displayed.
8.
Touch the [Delta] icon (
The values measured last is displayed instead of the Delta icon (
NOTE
● If reset is not selected, the Monitor Function does not start even when you
touch its Delta icon (
● The [Delta] icon (
● When the
elta icon is displayed, the Memory utton
5. Measuring Light Sources [Measurement Screen]
is released, the measurements will stop and the
5
).
).
) is deactivated when the power is turned
76
).
FF.
is disabled.
7