Table of Contents
Advertisement
5.
Touch the [OK] button.
Confirms and returns to the Measurement screen.
To return to the Measurement screen without confirming, touch the Cancel button.
Measurement Screen
The selected
exposure time
is displayed
on the
Measurement
screen.
NOTE
posure Time can also be set in the Tool o .
6.
Confirm the light measuring range.
When you return to the Measurement screen, ma e
sure to select Range L
7.
Press the Measuring Button 5.
Measurement will be taken and the light source
values will be displayed.
While the button is held, the meter measures
continuously.
When the button is released, the measurements
will stop and the light source value at the time of
release will be displayed.
NOTE
● [Over] or [Under] will be displayed if the light source illumination is too bright
or not bright enough, or if the color temperature is out of the measurement
range, when the Measuring utton is pressed. When the color temperature
is outside the calculation range, --- is displayed.
In this case, ad ust the brightness or color temperature of light source.
● Measurement and display will take longer in light levels below 30lx. The
LC illumination will normally switch off during measurement to avoid
influence to measurement.
Measurement in Ambient Light Mode is complete.
5. Measuring Light Sources [Measurement Screen]
Tool o
utton
(
).
63
Tool Box Screen
P101)
Light Selection Ring
Range L
Measuring utton
2
5
Hide quick links:
Advertisement
Table of Contents
