Konica Minolta CL-70F Operating Manual page 152

2.
Set the peak wavelength p within the range from 38 to 78 nm.
If the entered value is within the setting range, the [OK] button is displayed.
If it is outside the setting range, re-enter a value.
(within the setting range)
Input
number
[OK] Button
3.
Touch the [OK] button.
The number is memorized, and the display returns to the page 3 of the Preset
Editing (2°)/(10°) screen.
To return to the page
the [Cancel] button.
Preset Editing Screen
The p (Peak wavelength) is edited.
NOTE
The edited preset data will be displayed on the Preset Information screen.
p Screen
[Cancel] Button
of the reset diting
(Page 3)
139
7. Meter Settings [Setting] Screen
p Screen
(outside the setting range)
[Cancel] Button
) 0 ) screen without confirming, touch
( P19)
Outside the
range