Table of Contents
Advertisement
4.
Press the Measuring Button
The Light Selection Ring
when ta ing ambient light measurements.
When measuring flash units, select Range L
or Range
the flash.
77,
Measurements can now be made.
NOTE
Measurement and display will ta e longer in light levels below 0l . The LC
illumination will normally switch off during measurement to avoid influence to
measurement.
5.
The current measurement is displayed at the top of display area.
6.
Touch the [Memory Selection] icon.
The [Spectrum Comp. Memory] screen will be displayed.
Spectrum Comp.
Current
Measurement
Memory
Selection] Icon
5
to measure.
should be set to L
2
) depending on the brightness of
7 )
Screen
4. Setting the Measuring Conditions
Light Selection Ring
)
)
Measuring Button
Spectrum Comp.
Memory Screen
Memory
Selection
Area
2
5
Hide quick links:
Advertisement
Table of Contents
