Table of Contents
Advertisement
CAUTION
●
Depending on the flash e uipment used, the
flash may be triggered when the sync cord is
connected to the Sync Terminal
operating the Power Button
is the possibility of burns or negative effects
on vision, please handle with care.
NOTICE
● If you are using this measurement to judge color for photographic
reproduction by adjustable camera, be sure to use a shutter speed that
synchronize with the camera and flash system.
● If the triggering voltage of the flash used is extremely low, the flash
may not trigger. In this case, use "5-3 Measurement in Cordless Flash
Mode". ( P65)
5.
Confirm the light measuring range.
When you return to the Measurement screen,
select Range L
(
depending on the brightness of the flash.
NOTE
● Range L
(
units lower than
Select Range H.
● Range H
than
0l s)
b
. Because there
3
) or Range H
(
) Select this when measuring small and low power flash
0l s),
ver will appear if flash power is too high.
(
) Select when measuring powerful flash units brighter
nder will appear if flash power is too low. Select Range L.
71
5. Measuring Light Sources [Measurement Screen]
or when
ower utton
Light Selection Ring
Range H
Range L
)
Measuring utton
3
2
5
Hide quick links:
Advertisement
Table of Contents
