Konica Minolta CL-70F Operating Manual page 28

Item List
No. Part ame
1
Status Bar
2 [Measuring Mode] Icon
3 [Display Mode] Icon
4 ~ 8
[Display Item] Indication
9
[Tool Box] Icon
[Delta] Icon
10 (in Ambient Light Mode
only)
[Exposure Time]
11
Indication
NOTE
When values are outside the display or measurement range, [Under] or [Over] is displayed.
When the color temperature is outside the calculation range, [---] is displayed.
Under: Displayed if value is lower than measurement range (too dark).
Over: Displayed if value is higher than measurement range (too bright).
---: When the color temperature is outside the calculation range, [---] is displayed.
Description
Displays the setting contents. ( P16)
Displays the measuring mode. ( P22)
Switches to the Measuring Mode Selection screen.
Displays the display mode. ( P28) Switches to the
Display Mode Selection screen.
Switches to the Item Selection screen. ( P27)
Switches to the Tool Box screen. ( P79)
Displays when Monitor Function can be
performed.
When there is no reference preset value,
the icon is disabled.
When Monitor Function cannot be
performed, the ( ) icon is not displayed.
When is touched, Monitor Function is
activated. When displaying this delta icon or holding the
Measuring Button , the value differences of the preset
5
value and the current reading being measured will be
displayed. (The preset value is a value that has been
preset.)
When is touched, the icon returns to
and the values measured last are displayed.
Monitor Function is cancelled when the power is turned
OFF.
Note: When the Monitor Function icon is displayed, the
Memory Button is disabled.
7
Switches to the Exposure Time Selection screen.
( P24)
15
3. Basic Operation Methods