Headrest; Tray - Otto Bock Start M2S Instructions For Use Manual

54

7.19 Headrest

Head/neckrests or headrests make it possible to support the head in case of various severe disability indications.
The head/neckrests or headrests consist of polyurethane foam and can be cleaned with mild soap and water.
The option is installed on the product by qualified personnel if needed and adapted to the requirements of the user.
The head support can be removed from the wheelchair for transportation.
Removing the head support
1) Release the clamping lever (see fig. 56, item 1).
2) Pull out the adjustment tube with the head support (see fig. 56, item 2).
Attaching the head support
1) Insert the adjustment tube with the head support into the clamp fitting to the stop (see fig. 56, item 2/3).
2) Tighten the clamping lever (see fig. 56, item 1).
56

7.20 Tray

CAUTION
Improper adjustment
Crushing or pinching due to adjustments which are too tight
► Do not pinch the user when sliding in the product.
CAUTION
Driving with objects on the tray top
Injuries due to unsecured objects
► Remove all objects from the tray top prior to travelling.
Start M2S, Start M2
55
Use
33